Filter
Top Products
5 - 2
Configuring The Dolphin 7400/7450 RF Terminal
When you cold-boot the Dolphin 7400/7450 RF terminal, the red LED comes on and the green LED blinks, and after
approximately 3 seconds, the welcome screen shown below will appear.
Press <Enter> and you will be prompted to calibrate the screen and set the time and date. Refer to the section on Calibrating the
Screen, Setting the Date/Time
in Chapter 2 for additional information. After the date and time are set, the Dolphin demos and
Cisco® radio drivers self-install and the main menu for the HHP demos displays.
Client Utilities for the Cisco
®
DSSS 802.11b Radio
The following utilities are available for configuring the Cisco 802.11b radio:
Client Utility (ACU) - Configures the radio for use in a wireless network
Client Encryption Manager (CEM) - Configures a Wired Equivalent Privacy (WEP) key for the radio
Cisco Link Status (CLS) - Enables you to view the current status of the client adapter
Client Statistics Utility (CSU) - Enables you to view statistics that indicate how data is being received and transmitted by the
client adapter
Wireless Login Module (WLM) - Provides login interface to Radius server if using LEAP
This document covers the basics of the Client Utility (ACU). For more detailed information on these and the other utilities, please
refer to the document entitled “Using the Client Utilities for Windows CE” included on the Dolphin Documentation CD.
Dolphin Welcome Screen