Filter
Top Products
11
Telephone Operation
10
Telephone Operation
Basic handset operation
Making and answering calls
To answer a call, press PHONE or any dial pad button.
To make a call, press PHONE, then dial a number. Press
OFF to hang up.
To preview numbers before dialing, enter numbers first,
then press PHONE to dial. Press CLEAR at any time to
make corrections as you are entering numbers.
Hands-free speakerphone calls
To answer a call, press SPEAKER. To make a call, press
SPEAKER, then dial a number. During a call you can
press SPEAKER to toggle between hands-free speaker-
phone and normal handset use. Press OFF to hang up.
Last number redial
Press REDIAL to display the last 10 numbers called (up to
32 digits each). Use the ^V buttons to select a
number, then press PHONE to dial. Press SELECT then
ERASE to delete this number from the redial memory,
or SAVE to copy the number into your phonebook.
Hold and mute
Press HOLD to place a call on hold. Press PHONE (or
SPEAKER) to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to the
base speakerphone or to another handset.
Press XFER to display a list of sets. Use the ^V
buttons to highlight the set you want, then press OK to
transfer the call to the remote set.
The call will be placed on hold. Press PHONE or SPEAKER
at the remote set to resume the call.
HANDSET 1
Basic base operation
Making and answering calls
To answer an incoming call, press SPEAKERPHONE. To
make a call, press SPEAKERPHONE, then dial a number.
Press SPEAKERPHONE again to hang up.
To preview numbers before dialing, enter numbers first,
then press SPEAKERPHONE to dial. Press CLEAR at any
time to make corrections as you are entering numbers.
Last number redial
Press REDIAL to display the last 10 numbers called (up to
32 digits each). Use the ^V buttons to select a
number, then press PEAKERPHONE to dial (press
SELECT to erase this number from the redial memory,
or copy it into your phonebook).
Hold and mute
Press HOLD to place a call on hold. Press SPEAKER-
PHONE to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to a
handset.
Press XFER to display a list of sets. Use the ^V
buttons to highlight the set you want, then press OK to
transfer the call to the remote set.
The call will be placed on hold. Press PHONE or SPEAKER
at the remote set to resume the call.
Volume
Speakerphone
BASE
HANDSET 2
HANDSET 3
HANDSET 2
HANDSET 1
HANDSET 3
^V
OK
1
1
1
REDIAL MEM
MENU
XFER MUTE
HOLD
XFER MUTEHOLD
^ ^
OK
REDIAL MEMMENU
XFER MUTEHOLD
XFER MUTEHOLD