Filter
Top Products
1716
Telephone Operation
Handset clock settings
To set time
Follow steps at left to set the handset clock time. Use
the keypad to enter four digits (i.e., 09:15), then press
AM/PM to toggle the display between AM and PM.
When the correct time is displayed, press SAVE.
NOTE: You can choose to set the time manually, or
you can allow it to be set automatically with incoming
Caller ID information. The time will be set automatically
only if you subscribe to Caller ID service provided by
your local telephone company (see page 5).
To set the answering system clock, see page 25.
To turn clock on or off
The handset time display is optional. To turn it on or
off, select MENU, press V until CLOCK MODE is
highlighted, then press OK.
Press ON or OFF buttons to enable or disable the clock
display, then press OK.
HANDSET 1
SET TIME
HANDSET SETTINGS
CLOCK MODE
REGISTER
SET TIME
12:00 AM
Select MENU
Select SET TIME
Enter time, press AM/PM, then SAVE
To turn clock on or off
CLOCK ENABLE
ON
Phonebooks
Handset and base phonebooks
There are separate phonebook directories in the hand-
set and the base.
Each phonebook can store up to 50 entries. Each entry
can contain a number up to 32 digits, and a name up to
15 letters long. A convenient search feature can help
you find and dial numbers quickly (see page 19).
The procedure for entering, editing and dialing phone-
book entries is the same for both the handset and the
base.
Timeouts and error tones
If you pause for too long while making an entry the pro-
cedure will time out and you will have to begin again.
If all memory locations are in use, an error tone will
sound when you attempt to enter a new number. This
means the memory is full, and you will not be able to
store a new number until you delete an existing one.
PAT JOHNSON
123-456-7890
Handset: 50 entries
Base: 50 entries
REDIAL MEMMENU
OFF ONOK
^ ^
OK
<
AM/PMSAVE
^ ^
EDIT