Appendix
42
Appendix
Your package includes a handy wallet card to help you remember access commands
you can use to control your answering system from any touch-tone telephone.
If you misplace this card, just clip and save the card below.
Remote access wallet card
Fold here
Cut along dotted line
Action Remote Command
Voice help menu ......................#1
Play messages ............................#2
Repeat message ........................#4
Skip message..............................#6
Stop..............................................#5
Save messages............................Hang up
Delete message ........................#9 while message plays
Review announcement............#7
Record announcement............*7 speak after beep
#5 to stop
Record memo............................*8 speak after prompt
#5 to stop
End remote access call............*0 (or hang up)
Turn system off ........................#0 (enter again to turn on)
Turn system on ........................If off, system answers after 10 rings.
Enter # 0, then access code to turn
system on.
Call your phone number, then enter
your 2-digit access code (preset to 19).
2.4 GHz Cordless Speakerphone/Answering System E2555
Technical specifications
RF Frequency Band
(Handset to Base)
2400 MHz — 2483.5 MHz
Output Power 3 dBm
RF Frequency Band
(Base to Handset)
2400 MHz — 2483.5 MHz
Channels 95
Channel Spacing 864 KHz
Operating Temperature 32°F — 122°F
0°C – 50°C
Base Unit Voltage
(AC Voltage, 60Hz)
96 — 127 Vrms
Base Unit Voltage
(AC Adapter Output)
7 Vdc @900 mA
Handset Voltage 2 x 1.2V @800 mA