Filter
Top Products
Troubleshooting
95
Problem Solving
Communication No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
105
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
"Valid" (default setting) and the machine is printing the
received document(s) from memory, which also happens to
be the 32nd transaction, the machine will not auto answer
until the Transaction Journal completes printing.
105
56
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
98
No Unit Operation No unit operation To reset the machine, unplug the Power Cord for a few
seconds then plug it in again.
18
Mode Symptom Cause / Action page