Filter
Top Products
User Parameters
25
Installing Your
Machine
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving,
your ID Number will appear on the remote machine's display and their ID Number will appear on your
display.
We suggest you use your facsimile telephone number as your ID number. (Max. 20 digits)
NOTE 1. You may use to enter a "+" character at the beginning of the ID number to indicate the
following digit(s) for your country code.
Ex :+1 201 555 1212 +1 for U.S.A. country code.
+81 3 111 2345 +81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
Setting Your ID Number (Fax Telephone Number)
1
SET MODE (1-8)
2
USER PARAMETERS?
3
FAX TEL NO.?
4
TEL:❚
5
Enter your ID (max. 20 digits) by using the keypad and
key to enter a space between numbers.
Ex:
If you make a mistake, use or to move the cursor
one space beyond the incorrect number, press
then re-enter the new number.
If more than 11 characters are entered, the left side
characters will scroll off the display.
TEL:01 555 1212❚
6
7
1
4
SPACE
2 0 1
SPACE
5 5 5
SPACE
1 2 1 2
CLEAR