GE UF-4000 Answering Machine User Manual


 
Receiving Documents
57
Basic Operations
When your machine is set to this mode, your machine will not receive documents automatically. If you
receive a fax call, follow the procedure below to receive documents manually.
Setting the Telephone Mode
Operation of Telephone Mode
NOTE
1. This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your
extension phone is not a touch tone phone, press on the control panel of your fax
machine.
Telephone Mode
1
Change Fax Parameter No. 15 (IN MODE) to 1: Tel.
(See page 33)
2
Make sure that the lamp goes off.
RCV MODE=TEL
1
When your telephone rings, lift the handset of the External
Telephone.
If you hear a beep from the phone, it means someone
wants to send a fax. Or, if the caller answers and says he/
she wants to send a fax, then...
2
Remove any document from the ADF.
3a
If you answered the call using the handset,
3b
If you answered the call on an Extension phone,
or
within 1 second on your Extension phone. (See Note 1)
Your machine will be activated remotely.
4
Hang up the phone.
START