Filter
Top Products
17
NOTE: If you want to switch to the handset, pick it up and continue speaking. To switch to the headset press the
HEADSET button.
NOTE: The handset, headset, or speakerphone cannot be active when an intercom call is initiated (the handset should be
on the cradle and the speakerphone and headset turned OFF.)
2. To end the intercom call, hang up.
NOTE: If the receiving station does not answer within 45 seconds, the intercom call is cancelled. You will hear an error
tone and NO ANSWER shows in the display.
ANSWERING AN INTERCOM CALL
When your receive an INTERCOM call, the INTERCOM indicator flashes red, and the display shows the caller’s name
and station ID.
NOTE: If you are using the speakerphone, press the INTERCOM button to answer. If you are using the headset (headset indicator
flashes), press the INTERCOM button., or when the intercom indicator turns green, left the handset and begin speaking.
NOTE: Press SPEAKERPHONE or lift the handset to automatically select a party. If you receive an incoming call and
intercom call at the same time the unit automatically selects the ringing line.
INTERCOM HOLD
1. Make an intercom call or answer an intercom call.
2. Press the HOLD button. The Intercom indicator flashes green.
NOTE:
• When the intercom is on hold, you may not receive another intercom.
• If the other party terminates intercom, intercom hold is also released.
INTERCOM CONFERENCE CALLS
This feature allows you to have a 3-way conversation using the intercom feature and an open line.
1. Place a call or make an intercom call. If you already have someone on the line, skip to step 2.
2. Press the HOLD button.
3. Place a call on another line or make an intercom call.
4. Press the CONFERENCE button.
5. Speak to both parties.
NOTE: If you have more than one party on hold (telephone line or intercom), you must select the line for the party you
want to conference with.
To disconnect one party:
Press the line or intercom button for the person you want to continue speaking with, and the other party is
automatically disconnected.
To disconnect both parties:
Hang up the handset, or press the SPEAKERPHONE button.
NOTE: If you press the HOLD button to put them on hold first, you may then disconnect from each party individually.