Filter
Top Products
42
REPT Repeat call message. Indicates that a new call
from the same number was received more
than once.
UNKNOWN CALLER The incoming call is from an area not serviced by
Caller ID or the information was not sent.
WAITING HANDSET Prompt telling you to enter registration mode
REGISTRATION of handset.
Handset Sound Signals
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet .
Ensure the telephone line cord is connected to the base and the wall jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to the
base.
• Ensure the battery is properly charged (16 hours).
• Ensure the battery pack installed correctly.