Filter
Top Products
32
Dialing a Caller ID Number
When reviewing any call record in the Caller ID memory, you can dial back
the caller’s number.
1. Make sure the phone is OFF (not in talk mode).
2. Press REVIEW or NEXT button (base) or CID/VOL (or) button
(cordless handset) until the desired call record is displayed.
Depending on (a) how the incoming caller’s phone number is formatted
when received, and (b) whether or not you pre-programmed your local
area code into memory, you may need to adjust the format of the caller’s
phone number before dialing it back.
The FORMAT button lets you change the format of the displayed number.
Available formats include:
Number of digits Explanation Example
Eleven digits long distance code “1”
+ 3-digit area code
+ 7-digit telephone number. 1-317-888-8888
Ten digits 3-digit area code +
7-digit telephone number. 317-888-8888
Seven digits 7-digit telephone number. 888-8888
NOTE: If the phone company does not supply all ten digits of an incoming
caller’s number, you will not be allowed to adjust the format of that number.
Scroll to the number you want to call back:
3. If using the base or handset: press the REVIEW or NEXT button (base) or
CID/VOL (or) button (cordless handset).
4. If the number does not dial as shown, press the FORMAT button. Repeat
if necessary, until the correct number of digits show in the display.
5. Press the TALK/call back button on handset or SPEAKER/CALL BACK
button on base. The number dials automatically.