Filter
Top Products
14
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
Ringer Level
NOTE: This setting may only be made with the base.
1. Press the FLASH/PROGRAM button until SET RING LEVEL shows in the
display. 1HI is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the REVIEW or NEXT button to scroll to your selection.
3. Press FLASH/PROGRAM again to store your selection.
NOTE: If you turn the ringer OFF, “RINGER OFF ” shows in the base display.
Ringer Tone
NOTE:
This setting may be made on both the base and the cordless handset,
independent of each other.
You may choose from three different ringer tones.
1. Press the FLASH/PROGRAM button until SET RINGER TONE or RINGER
TONE shows on the display. The default ringer tone is 1.
2. Use the touch-tone pad to select 1, 2, 3 or use the REVIEW or NEXT
button on the base unit or CID/VOL (or) button on the handset to
scroll to your selection. The ringer tone plays for few seconds.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
Tone/Pulse
NOTE: This setting may only be made with the base.
Most telephone systems use tone dialing, however, some may still use pulse
dialing. Depending on your telephone system, set the dialing mode as follows:
1. Press the FLASH/PROGRAM button until SET TONE/PULSE
shows on the
display. The default setting is 1TONE.
2. Use the touch-tone pad to select 1TONE
or 2 PULSE, or press the REVIEW
or NEXT button to scroll to 1TONE or 2 PULSE.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.