Filter
Top Products
27
Inserting a Pause in the Dialing Sequence
Press the #PAUSE button (base) or the PAUSE# (cordless handset) on
the touch-tone pad to insert a delay in the dialing sequence of a stored
telephone number when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or wait for a computer access
tone.) Each pause counts as 1 digit in the dialing sequence.
Reviewing, Changing or Deleting Stored Names/Numbers
To Review: Press the MEM/CONFERENCE (base) or MEMORY/conference
(cordless handset) button, then press the REVIEW or NEXT button (base) or
the CID/VOL (or) button (cordless handset) to scroll through the stored
numbers. Or press the memory location number.
To Change: Follow the steps under Storing a Name and Number in Memory
except replace the stored name or number with the new information.
To Delete: Press the MEM/CONFERENCE (base) or MEMORY/conference
(cordless handset) button, then press the desired memory location button
(0 through 9 number keys) or use the REVIEW or NEXT button (base) or the
CID/VOL (or) button (cordless handset) to scroll to a desired memory.
1. While the entry displays, press DELETE (base) or CHAN/delete (cordless
handset) button to mark the entry for deletion. The display shows
DELETE?
2. Press DELETE again to delete the entry. **DELETED** is displayed.
Dialing a Stored Number
Handset:
Make sure the phone is ON by pressing the TALK/call back button on the
cordless handset.
1. Press the MEMORY/conference button.
2. Press the desired memory location button (0-9). The stored telephone
number dials automatically.
-Or-