Filter
Top Products
25
2. If the originating unit is the handset, press the PAGE/INTERCOM button
on the base to set up the intercom. Then press the MEMORY/conference
button on the handset to retrieve the external caller. Three-way
conversation begins, and CONFERENCE shows in the display.
3. If the originating unit is the base, press the intercom button to setup
the intercom. Then press the base MEM/CONFERENCE button on the
base to retrieve the external call. Three-way conversation begins, and
CONFERENCE shows in the display.
NOTE: A handset or the base may enter a conversation directly by pressing the
TALK/call back button on the handset or the SPEAKER/CALL BACK button
on the base while the other handset or the base is engaged with an external call.
Memory
The cordless handset and base each have their own separate memory
storage areas. Store ten 15-character names and 24-digit telephone
numbers in the handset memory, ten 15-character names and 24-digit
telephone numbers in the base memory.
NOTE: Press *TONE/EXIT (base) or TONE */exit (cordless handset) to exit
memory.
Storing a Name and Number in Memory
1. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button.
2. Press the desired memory location button (0 through 9 number keys) or
use the REVIEW or NEXT button (base) or the CID/VOL (or) button
(cordless handset) to scroll to the desired location. If the memory location
is occupied, the stored name and number displays. If the memory
location is unoccupied, EMPTY shows in the display.
3. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button again. The display shows ENTER NAME.