Filter
Top Products
48
Unit beeps • Place the handset in the cradle for 20 seconds. If it still
beeps, charge battery for 12 hours.
• Clean charging contacts on cordless handset and charger
with a soft cloth, remove comma or an eraser.
• See solutions for “No dial tone” on previous page.
• Replace battery.
Memory Dialing • Did you program the (mem) memory location keys correctly?
doesn't work • Did you follow proper dialing sequence?
Unit locks up and no • Unplug the AC power supply from the wall outlet and the
communication between back of the base. Remove the handset battery. Wait for 30
the base and cordless seconds and plug the power adapter back into the base
handset and wall outlet. Reconnect the battery and charge for 12
hours.
CALLER ID
Problem Solution
No Display • Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the AC power supply from the
base and reconnect it.
Caller ID Error Message • The unit displays this message if it detects anything other
than valid Caller ID information during the silent period
after the first ring. This message indicates the presence of
noise on the line.
No Caller ID • Did you order Caller ID service from your phone company?
BATTERY
If you experience any of the following problems, even after fully recharging the battery, you
may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
• Charge/page or handset antenna indicator fails to light