Filter
Top Products
46
DISPLAY MESSAGES
The following indicators show the status of a message or of the unit.
ERROR Caller information has been interrupted during transmission
or the phone line is excessively noisy.
ENTER NAME Prompt telling you to enter the name in one of the 10
memory locations.
DELETE ALL? Prompt asking if you want to erase all Caller ID records.
DELETE CALL ID? Prompt asking if you want to erase the
current Caller ID record that is shown on the display.
DELETE? Prompt asking if you want to erase one of the 10 numbers
stored in the phone's outgoing memory.
END OF LIST Indicates that there is no additional information in Caller ID
memory.
NEW Indicates call or calls have not been reviewed.
UNKNOWN CALL The incoming call is from an area not serviced by Caller ID or
the information was not sent
PAGING Someone has pressed the page/intercom button on the base
or handset.
BLOCKED NUMBER The person is calling from a number that has been blocked
from transmission.
REPT Repeat call message. Indicates that a new call from the same
number was received more than once.
NO DATA No Caller ID information was received.
HANDSET SOUND SIGNALS
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning