Filter
Top Products
27
3. Press the (mem) memory button again. The display shows
ENTER NAME
.
4. Use the handset number keypad to enter a name (up to 15 characters).
More than one letter is stored in each of the number keys. For example, to
enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3
times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key
3 times for the second letter L, and press the 1 key to insert a space
between the first and last name. Press the 7 key 4 times for the letter S;
press the 6 key once for the letter M; press the 4 key 3 times for the letter I;
press the 8 key for the letter T; press the 4 key twice for the letter H.
5. Press the (mem) memory button again to save your selection. The
display shows
ENTER TEL NUMBR
.
6. Use the number keypad to enter the area code followed by the telephone
number (up to 24 digits, including pauses) and press the (mem) memory
button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
STORING A REDIAL NUMBER
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem (memory) button.
3. Press any number key (0-9) to store the phone number in that memory location.
4. Press mem (memory) and
ENTER NAME
shows on the display.
5. Use the handset number pad to enter the name, then press mem
(memory) and
ENTER TEL NUMBR
shows on the display.
6. Press redial/delete to display the redial number and name.
7. Press mem (memory) again to confirm.
NOTE : If the redial number has more than 24 digits, the redial number
cannot be stored in memory.