Filter
Top Products
26
SETTING UP A THREE-WAY CONVERSATION USING INTERCOM
1. Press the PAGE/intercom button on the base or int button on the
handset when an outside call is in progress.
The external caller is placed on hold. The charge/page button on the
base or the handset antenna indicator blinks, and a paging tone sounds
at both units.
PAGING
is displayed on the originating unit and
PAGE
YOU
on the other unit.
2. If the originating unit is the handset: Press the base PAGE/intercom
button to set up the intercom first. Then press the handset hold button
to retrieve the external caller. Three-way conversation begins, and
CONFERENCE shows on the display.
3. If the originating unit is the base unit: Press the handset int button to
setup the intercom first. Then press the base hold button to retrieve the
external caller. Three-way conversation begins, and CONFERENCE will
be shown on the LCD display.
MEMORY
The handset and base each have their own separate memory dialing
storage areas. Ten 15-character names and 24-digit telephone numbers can
be stored in the handset memory. Ten 15-character names and 24-digit
telephone numbers can be stored in the base memory.
STORING A NAME/AND NUMBER IN MEMORY
1. Press the (mem) memory button.
2. Press the desired (mem) memory location button (0 through 9 keys). If
the memory location is occupied, the memory location and stored name
and number appear on the screen. If the memory location is empty,
EMPTY
appears in the display.