Filter
Top Products
14
RINGER LEVEL SELECTION
NOTE: This setting is for the base only.
1. Press the flash/program button until “
SET RING LEVEL
” shows in the
display. “
1 HI
” is the default setting.
2. Press 1, 2 or 3 on the base keypad or use the CID review (up or down
arrow) button to scroll to your selection.
3. Press flash/program again to store selection.
NOTE: You can press flash/program to go on to the next feature at any time.
To exit the menu, press flash/program repeatedly.
RINGER TONE SELECTION
1. Press the flash/program button until “
SET RINGER TONE
” shows in the
display. “
1
” is the default setting.
2. Press 1, 2 or 3 on the handset or base number pad or use the CID review
(up or down arrow) button to scroll to your selection.
3. Press flash/program to store selection.
CURRENT DAY/TIME SELECTION
NOTES: This setting is for the base only.
Time is transmitted automatically by your local phone company as part of
Caller ID service. If you have subscribed to Caller ID, the current time will be
set automatically when your first CID call is received. Otherwise, you can set
the time manually.