Filter
Top Products
Rino 520HCx and 530HCx Owner’s Manual 53
MaIn Menu
Heading Setup Page
You can select the type of heading modes, North
References, or magnetic variation (when set to “User”).
To access the Heading Setup page:
From the Setup Menu, select Heading.
Display—choose from Cardinal Letters, Degrees
or Mils.
North Reference
—choose from True, Magnetic,
Grid or User options.
The following features apply to the Rino 530HCx only:
Switch to compass heading when below
—enter
the selected speed for the Rino 530HCx to switch
from using GPS to using the compass for guidance.
for more than…
—enter a time limit to switch to
the compass. When you travel at the speed entered
above for the time entered here, the Rino 530HCx
switches from GPS to the compass.
Calibration Setup Page
For the Rino 530HCx only. Refer to page 29 and page 33.
•
•
•
•
Altimeter Setup
To setup the Altimeter:
1. From Setup Menu, select Altimeter.
2. Select the Auto Calibration eld to select from on
or off. When on, elevation is corrected by GPS.
3. Select the Barometer Mode eld to specify
“Variable Elevation” (used when you are moving) or
“Fixed Elevation” (used when stationary.)
Welcome Page Setup
Insert a message when you turn the unit on.
To setup the Welcome Page:
1. From the Setup Menu, select Welcome Message.
2. Use the on-screen keyboard to begin entering your
message in the Welcome Message eld.