Filter
Top Products
8 Rino 520HCx and 530HCx Owner’s Manual
GettInG Started
Transferring Data to a microSD Card
To install or remove the microSD card:
1. Remove the battery pack from the back of the unit
by turning the locking D-Ring and lifting up.
2. Locate the card tray at the center of the battery
compartment.
3. If you want to install the card, slide the tray cover
forward, then lift up to insert the card in the tray. Be
certain the card contacts are facing down.
To transfer map data to the microSD card:
1. Lift the weather cover from the USB port on the
upper back of the unit. It is recommended that you
use the USB port rather than the serial connection
port for faster data transfer.
2. Connect the USB cable provided with the unit to
the USB port on your computer and to the mini-
USB port on the back of the unit.
3. Follow instructions for selecting and downloading
maps provided with the MapSource
®
map data
disk. See page 60.
USB Port - under weather cover
Back of Rino
microSD card tray is located beneath the
battery on the back of the unit.
Slide the tray cover back to OPEN,
then lift to remove or insert the
microSD card. Close and slide back
to LOCK.
Detail of microSD card tray
in Battery Compartment