Garmin 530HCx Two-Way Radio User Manual


 
16 Rino 520HCx and 530HCx Owner’s Manual
BaSIc operatIon
Key Beep—choose from four tones or off to emit a
tone when a key is pressed.
Power Beep
—enable or disable the unit on and off
tone.
Turn Warning (Early)
—choose from 19 tones or
off to signal an upcoming turn on a route.
Turn Warning (Final)
—Choose from 19 tones or
off to signal the nal turn on a route.
Proximity Alarm Tones
—access by selecting the
options menu. (See page 55 for details.)
A “Set Quiet Mode” option is available in the options
menu to mute all tones, except proximity alarm tones.
Setup Scanlist
Refer to “Scanning and Monitoring” for complete
information about this feature and the options in
this page.
Use Weather Radio
Available for the Rino 530HCx only, the Weather Radio
provides a constant update of the weather conditions. The
Weather Alert feature further enhances the Weather Radio
by automatically detecting any weather alert tones if you
are not actively transmitting or receiving with the radio.
To access the Weather Radio, select the Weather button
and press Enter or select the Radio page Option Menu
button. Press Enter when Use Weather Radio is selected
to turn on the weather radio. You can also access the
Weather Radio through the Shortcuts Menu.
When the Weather Radio is on, a “Ready To Receive
Weather” message appears if no signal is present or the
squelch is set too high. A “Receiving Weather” message
is shown if weather is being received, if squelch is too
low, or monitor is on. The Weather Radio has a separate
squelch setting from the FRS/GMRS radio.
Change the Weather Radio channel in the same manner as
changing the FRS/GMRS radio channel. There are seven
Weather Radio channels (1 through 7) available.