Filter
Top Products
Rino 520HCx and 530HCx Owner’s Manual 31
BaSIc operatIon
The Plot or Prole Field is located in the center of the
page, congure it to show either elevation or ambient
pressure or barometer plots as selected from the Altimeter
page option menu.
Data elds
Status window
Altimeter Page Options
Plot Over Time/Distance—plots the changes in
elevation over a length of time or over a distance.
When Plot Over Distance is selected, Plot over
Time is shown in the option menu (and vice versa).
View Pressure/Elevation Plot
—shows a record of
changes in barometric pressure or elevation for a
set period of time.
•
•
Plot Ambient/Barometer—changes between
plotting ambient pressure* versus time and
barometric pressure versus time.
Zoom Ranges
—sets the zoom range for elevation,
distance, or time.
Pan Plot
—scrolls through the collected data plots
to view elevation, time of day, and date a specic
point was created.
Reset…—clears recorded data from the page to
begin recording new data.
Calibrate Altimeter
—increases the accuracy of
the altimeter. You must know your elevation or
pressure to calibrate the altimeter. See page 33.
Restore
Defaults—returns to the original factory
settings.
* Ambient Pressure is the actual pressure at your location. Barometric Pressure
is the ambient pressure measured relative to sea level.
•
•
•
•
•
•