Filter
Top Products
7-4
7.4 Confirming VHF Channels
You can confirm VHF channels registered as follows:
How to confirm VHF channels
At screen 1, select “CH” and press the [ENT] key. Then, follow
the procedure below.
Press the [CANNEL] key to select channel mode.
Rotate the [CHANNEL] key control to view channels.
Do one of the following:
Continue channel confirmation: Operate the [CHANNEL] key.
Escape: Press the [CANCEL] key.
Confirm Tx power: Press the [ENT] key twice.
USA CH: 16-Tx SIMP LOW
protected sel[MODE]/[CH]
USA CH: 16-Tx SIMP LOW
protected sel[MODE]/[CH]
INTL CH: 016-Tx SIMP HI
protected sel[MODE]/[CH]
VHF channel status
xR/xT:xT)xelpmiS(PMIS)W52(IH
ylnoxR:xR)xelpuD(PUD)W1(WOL
desutonlennahC:elbanU