Filter
Top Products
4-3
(from previous page)
* Ready for calling
INDIVIDUAL CALL CH70
* Wait for ack BQ *
Next CH70 5.0 min
Press the [ENT] key.
Transmission time
about 0.5 seconds
Select mode desired.
Usually select SMP or DUP .
Telecom1??
Telecom2:
Telecom1 < >
SMP Dup DAT FAX NO
Channel?
Press the [SELECT] key.
(To eselect telecommand 1.)
Press the [SELECT] key.
Working channel < >
input digit =
Enter channel followed by
[ENT] key.
Continued on next page.
Counts down from five minutes.
Regulations prohibit calling to
same station during this time.
* Call in progress
INDIVIDUAL CALL CH70
(Transmitting)
Press the [CALL] key.
To cancel message
prepared, press the
[CANCEL] key.
(Return to normal display.)
Note; Working channel is normally set by coast
station. Therefore, set up for "No information"
by setting the working channel as 9999.