Filter
Top Products
4-23
Transmitting retrieved message
You can send the acknowledged call (DIST ACK or ACK BQ)
under certain conditions after retrieving a received message. Refer
to page 3-5 for transmitting the DIST ACK signal.
Example: Transmit acknowledge back (ACK BQ) signal in response
to an individual call (Refer to page 4-5.)
Acknowledge call < >
ACK END NEXT DEL
Received call < >
DISTRESS ORDINARY
Select "ORDINARY," then press the [ENT] key.
* Acknolege call *
Telecom1?
Channel?
Press the [CALL] key to transmit the ACK BQ signal.
Press the [ENT] key.
Press the [ENT] key.
* Ready for calling *
ACK BQ CALL CH70
Press the [ENT] key.
Press the [t] key.
(To return to
previous menu.)
END: Returns to normal
display.
NEXT: Recalls received
message.
DEL: Deletes received
message from
memory.
Ordinary log No. <1/50>
To view contents of message,
press the [ENT] key successively.
Select "INDIVIDUAL"
number desired by the
arrow keys.
To change, press the
[SELECT] key.
To change, press the
[SELECT] key.
Note: If the ACL BQ signal is transmitted more than five minutes
after reception of ACK RQ signal, it is treated as an ACK RQ sig-
nal rather than ACK BQ.