Filter
Top Products
5-5
Operation after making DSC telephone call
Voice communication is started. After completion of communica-
tion, the display changes as shown in (1) or (2) below depending
on how voice communication was terminated.
(1) When you end voice communication by pressing the [CAN-
CEL] key or hanging the handset on the hanger of the VHF, the
display of the FM-8700 changes as follows.
Note: If a subscriber hangs the handset on the hanger to
terminate voice communication, coast station will transmit the
“End of call” command to you to break the communication
line.
PSTN CALL
Transmits "End of call" command.
Display 1
Working channel
* Call in progress *
END OF CALL
If "End call ack" is not received
within two seconds;
If "End call ack" is
received;
* Waiting for end call ack *
AUTO RELAY in 2 sec
* Call in progress *
AUTO RETRY
* End call not received *
No charge information
* Waiting for end call ack *
2 sec to go
Counts down.
If not received;
(No charge time information)
* Received * END OF CALL
Charge time:
Charge time appears.
If "End call ack" is received;