Filter
Top Products
Enabling the Bluetooth transmitter Changing Your IP Phone Settings
Copyright © 2007 Cypress Communications, Inc. All Rights Reserved. 41
4. Press the Ok key. A check mark appears beside the item you selected. You return to the
Auto Login screen.
Changing your password
Follow this procedure to change the password that you use to log on to the network. The
default password is the last four digits of your telephone number + 99. Passwords must be
between four and six digits in length.
Steps to Take
1. From
the main menu, open the User menu.
2. From the User menu, select and open Password. The Old Password screen appears.
3. Use the dialpad to enter the old password, and then press the Ok key.
4. Use the dialpad to enter the new password, and then press the Ok key.
5. Use the dialpad to enter the new password again, and then press the Ok key. The message
‘Password changed’ appears.
6. Press the Ok key.
Enabling the Bluetooth transmitter
Before you can use a Bluetooth headset with your IP Phone 1140, the Bluetooth transmitter
must be enabled in the IP Phone.
Steps to Take
1. Double-press the Services
button. The configurations menu appears.
2. Use the Down navigation key to select 3. Network Configuration.
For help with the Navigation keys, see “Using the navigation keys” on page 33.
3. Press the Ent
er key (located in the center of the navigation keys).
4. Use the Right navigation key to scroll to the Enable Bluetooth item at the bottom of the
settings list.
5. If the Enable Bluetooth setting is Auto or No, press the Enter key to edit the setting.
6. Use the Up or Down button to select Yes.
7. Press the Enter key to save the change.
8. Press the Apply&Reset soft key.
9. At the prompt, log in to your phone.