Danish Interpretation Systems Installation Manual
Manual 01 19 60011
8
a.
Click Start, and then click Run.
b.
In the Run dialog box, type Firewall.cpl, and then click OK
c.
In Control Panel, double-click Windows Firewall.
d.
In the Windows Firewall dialog box, click Add Program on the Exceptions tab.
e.
In the Add a Program dialog box, click the Browse button, and then locate the Msdtc.exe file. By default,
the file is stored in the <Installation drive>:\Windows\System32 folder.
f.
In the Add a Program dialog box, click OK.
g.
In the Windows Firewall dialog box, click to select the msdtc option in the Programs and Services list.
h.
Click Add Port on the Exceptions tab.
i.
In the Add a Port dialog box, type 135 in the Port number text box, and then click to select the TCP
option.
j.
In the Add a Port dialog box, type a name for the exception in the Name text box, and then click OK.
k.
In the Windows Firewall dialog box, select the name that you used for the exception in step j in the
Programs and Services list, and then click OK.
Windows Vista corrections
1.
Make sure that the Log On As account for the MSDTC service is the Network Service account. To do this,
follow these steps:
a.
Click Start, and then click Run.
b.
In the Run dialog box, type Services.msc, and then click OK.
c.
In the Services window, locate the Distributed Transaction Coordinator service under Name in the
right pane.
d.
Under the Log On As column, see whether the Log On As account is Network Service or Local
System.
If the Log On As account is Network Service, go to step 2. If the Log On As account is Local System
account, continue with these steps.
e.
Click Start, and then click Run.
f.
In the Run dialog box, type cmd, and then click OK.
g.
At the command prompt, type Net stop msdtc to stop the MSDTC service.
h.
At the command prompt, type Msdtc –uninstall to remove MSDTC.
i.
At the command prompt, type regedit to open Registry Editor.
j.
In Registry Editor, locate the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTCregistry key.
Delete this key.
k.
Quit Registry Editor.
l.
At the command prompt, type Msdtc –install to install MSDTC.
m.
At the command prompt, type Net start msdtc to start the MSDTC service.
Note that the Log On As account for the MSDTC service is set to Network Service account.
2.
Enable MSDTC to allow the network transaction. To do this, follow these steps:
a.
Click Start, and then click Run.
b.
In the Run dialog box, type dcomcnfg.exe, and then click OK.
c.
In the Component Services window, expand Component Services, expand Computers, expand My
Computer, and then expand Distributed Transaction Coordinator.
d.
Right-click Local DTC, and then click Properties.