DCS SW 6000 Conference Phone User Manual


 
Danish Interpretation Systems Installation Manual
Manual 01 19 60011
33
If no license file is found, the license file is invalid or the license is expired this will be displayed using a
message box on the PC running the CUI interface and a system message will also be sent to CUA computers
that have system message monitoring capabilities.
IMPORTANT:
Connection to the CU is needed for the license to be checked and hence the operation of said SW. If the
CU is not connected and therefore the licence file is not checked the CAA can be started and access the
Database info such as the seat table but all of the licensed features would be greyed out and
unavailable.
Installing the CP 6001 Chip Card Programmer
The CP 6001 Chip Card programmer is used for programming and reading DIS chip cards. To install the
programmer follow the instructions:
1 Connect the programmer to an available USB
port on the PC, where a CAA application is
installed.
Your windows operating system will
automatically detect the CP 6001 by showing the
‘Found New Hardware Wizard’.
Click ‘No, not this time’ to continue.
2 Insert the SW 6000 v5.3.xx CD-ROM in the CD
drive
Select ‘Search removable media (floppy CD-
ROM…)
Click ‘Next’.
If the ‘Windows Installer’ cannot find the driver,
please proceed to step 5.