Filter
Top Products
INSTALLATION
2
For wall mounting, fix the related plate as follows:
Set - screw
Mounting holes
Fixing plate guide
Figure 3 - Wall Mounting Base
1. Using the mounting holes on the plate as a pattern mark the wall where you
desire to mount STARGATE™;
2. Drill two appropriate size holes;
3. Insert the threaded dowels into the holes;
4. Position the plate on the wall and affix it by means of the two screws;
5. Insert STARGATE™ (as shown in Figure 3) by sliding the fixing plate along the
guide on the mounting base;
6. Fix it by means of the set - screw if necessary.
7