Filter
Top Products
Performing a Firmware Upgrade
If a firmware upgrade for the IP Phone is available, the system prompts you
to upgrade when you log on. If the firmware level is between the minimum
and maximum level set by the administrator, Yes and No options appear on
the soft keys. If the terminal is below the minimum level, the only option is
yes. You cannot log on until you perform the upgrade.
While an upgrade is in progress, the ter minal reboots and becomes
temporarily unavailable.
Follow this procedure to upgrade the IP Phone firmware.
Step Action
1
From the main menu, select and open Upgrade.
The Upgrade confirmation screen appears.
2
Confirm the action.
A second confirmation screen appears.
3
Press Yes .
The firmware is downloaded.
—End—
Using the Directory
Adding or editing a directory entry
Follow this procedure to add or edit a directory entry. See "IP Phone 1140
components" for the location of the directory key.
If you are unfamiliar with how to use the dialpad to enter text, see "Using the
dialpad to enter text" before you begin this procedure.
Step Action
1
Press the director
y key to access the directory.
2 Perform one of these actions:
•
Select and open New Entry. Press Ok.
•
If you are editing an existing entry, navigate through the list to
select the entry, then press Ok.
3 From the New Entr y menu, select and open Edit Number.
4 Enter the number and press Ok.
Page 22