Filter
Top Products
Using the User Menu65
Changing your password
If you are unfamiliar with how to use the dialpad to enter text, see "Using the
dialpad to enter text"
before you perform this procedure.
Step Action
1
From the main menu, open the User
menu.
2 S
elect and open Password..
The system prompts you to enter your old password.
3 Use the dialpad to enter the old password.
4
After you enter the old password, use the dialpad to enter the new
password in the same screen.
5 Press Ok.
Use the new password the next time you log on.
—End—
Testing the Local Mode
The Diagnostics menu is mainly used by an administrator for registering the
terminal with a Survivable Remote Gateway.
Follow this procedure to test the local mode.
Step Action
1
From the main menu, open the Diagnostics
menu.
2
From the Diagnostics menu, select and open Test Local Mode.
A confirmation screen appears.
3
Press Ok.
4
Press Yes.
The terminal transitions to its secondary IP address and temporarily
disconnects from the IP Client Manager.
—End—
Page 21