Filter
Top Products
83 – ENGLISH
Restore Default Announcement(s)
1. You must use the base to restore the default
announcement(s).
2. Press under the word Menu on the screen to display
the main menu list.
3. Press or to scroll to TAM setup and then press
under the word Select.
4. Press to choose Outgoing Msg and then press
under the word Select.
5. Press or to choose Erase OGM and then press
under the word Select.
6. You will hear a confirmation beep and the recorded OGM is
now deleted and the original default message returns.
█
Message Options
Answering Machine Volume
When listening to your messages through the base, adjust
the volume by using the Volume Control V- or V+ on the right
side of the phone. When listening to your messages through
the handset, adjust the volume by using the Vol+ or Vol- keys
on the left side of the handset or up or down on the
navigation key.
Screening Calls (only the handset can intercept the call)
1. When the answering machine answers the call, listen while
the caller leaves a message.
2. To speak to the caller, pick up the handset and press
(If you have Auto Answer ON and your phone is in the
base, you will still need to press after picking up
the handset).
The answering machine automatically stops recording when
you activate the handset.
TIP: Make sure the volume on the phone is set loud enough to
hear your incoming callers.