Filter
Top Products
34 – ENGLISH
To use the cordless handset headset jack:
As soon as you plug your headset into the headset jack on the
cordless handset, it will be activated.
To use the base audio neckloop jack:
1. Plug your neckloop, headphones, headset or other accessory
into the base Audio jack.
2. If you want to speak into the handset, lift the handset,
listen for dial tone and dial the number. Speak into the
handset and adjust your volume. To end the call, replace
the handset to the base.
3. If you want to speak into the speakerphone, press the
Speaker key, listen for dial tone and dial the number. Speak
into speakerphone (the conversation will be heard through
both your audio equipment and over the speakerphone)
and adjust your volume. To end the call, press the Speaker
key again on the base.
To use the base headset jack:
1. Plug your neckloop, headphones, headset or other accessory
into the base Headset jack.
2. Press the Headset key, listen for dial tone and dial the
number. Talk into the headset microphone and adjust your
volume (see below for amplification instructions). To end
the call, press the Headset key.
█
Using the Base Amplification Function
Your ClearSounds® A1600 is equipped with a specialized
amplification function designed to adjust to your needs.
Flexibility in the management of amplification and tone is
important when trying to achieve listening clarity. Be sure to
try all levels of amplification and tone to find the best level for
your hearing needs.
The Volume and Tone control on the front panel of the phone
allow you to adjust the volume of the headset jack and neckloop
jack during a call. During a call, adjust the controls to fit the
levels to your hearing requirements.