Filter
Top Products
49 – ENGLISH
Reminder: Press under the word Back on the screen from
any menu to return to the previous screen. To return to the
main screen, press . Otherwise, after 30 seconds, the
phone will automatically return to the main screen from any
menu if no key is pressed.
█
Registering the Handset
The supplied handset is already registered to the base unit,
and you can register up to 4 additional handsets to the base.
1. Before registering an additional handset to the base, you
should press and hold the page key , which is located on
the main base until you hear a loud tone and then release it.
2. Press under the word Menu on the screen of the
handset you are registering to display the main menu list.
3. Press up or down to scroll to Registration and
then press under the word Select.
4. Press up or down to scroll through the base list and
select one of the bases and then press under the word
Select. The handset will search for the requested base.
5. If the base is found, and the handset is successfully
registered, you will be prompted to enter the PIN code
(the default PIN is 0000). Upon validation of the PIN, the
Registration tone will sound and the base assigns a number
to the handset. If the PIN entered is invalid, a warning
tone will sound and the handset will return to the previous
registration state.
6. If the base is not found, the handset will behave according
to the Out of Range description found on page 52.
Note: Remove Handset 1 from the main base while
registering additional handsets.
HANDSET SET UP