Filter
Top Products
38 – ENGLISH
Method 2:
1. Use the keypad to enter the number you want to store. You
can use under the word Clear to edit the number.
2. Press and hold one of the Memory dial keys for at least 2
seconds, and the display will show the number you have
entered. Press under the word Save.
3. The display will show “Name:” Enter the name you want to
use and then press under the word Save (see page 44).
4. The display will show the list of ring tones to select
from. Press or to select the desired ring tone. When
adjusting the Melody, the handset plays the selected
melody. Press under the word Select.
5. Repeat for each Memory dial key you want to use.
Dialing from Memory Numbers
1. In standby mode, press one of the Photo Dial keys, the display
will show the corresponding number. If you selected the
wrong memory dial, either select the correct memory dial or
press under the word Clear repeatedly until you get back
to the main screen.
2. Press the Speaker key and the phone will begin to dial.
NOTE: Entering a new number in the same location will
automatically erase the previous number.
Erase Memory Numbers
1. Press under the word PhoneBk to enter the phonebook.
2. Press or repeatedly until you reach the desired
entry, and then press under the word Options.
3. Press or to scroll to Erase and then press under
the word Select and the entry will be immediately deleted.
4. Repeat for each entry to be erased.
█
Inserting Photos in Memory Keys
1. Cut your photo using the template provided as a guide.
2. Remove the transparent cover of the memory key and insert
the photo and replace the cover or slide the photo in the
top slot of the cover.