Cisco Systems CP7921GAK9RF Conference Phone User Manual


 
Basic Call Handling
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 37
Tips
To use any button to answer a call, see Changing Keypad Settings, page 72.
You can answer an incoming call even when the keypad is locked.
If you were using an application or service before you answered an incoming call, your application
or service will resume after you end the call.
Ending a Call
To end a call, simply disconnect. Here are some more details.
Automatically connect to an
incoming call after a ring or
two
Ask your system administrator to set
up the Auto Answer feature. After
ringing once or twice, the call
automatically connects to the handset
or headset without pressing
.
Using AutoAnswer, page 67
Answer a call on your
mobile phone or other
remote destination
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
Your wireless IP Phone and remote
destinations receive calls
simultaneously.
When you answer the call on your
wireless IP Phone, the remote
destinations stop ringing, are
disconnected, and display a missed call
message.
When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other remote
destinations.
Managing Business Calls
Using a Single Phone Number,
page 62
If you want to... Then...
End the call Choose , EndCall, or Options > EndCall.
Disconnect one call but preserve
another call on the same line
Choose EndCall or Options > EndCall. If necessary, remove
the call from hold first.
If you want to... Then... For more information, see...