Filter
Top Products
An Overview of Your Phone
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 29
Understanding Out-of-Range Alerts
Your system administrator can configure your phone to send you an audible alert (beep) when you are
out of range of the wireless network. When you hear the alert, this icon
(no signal) will be
displayed on the phone screen.
When you are out of range of the wireless network, you will not be able to use the phone for features
requiring a wireless network connection, such as making and receiving calls.
If your system administrator enabled the out-of-range alert, depending on the configuration, you
might hear a beep only once, or every 10, 30, or 60 seconds until you are back within range of the
wireless network.
To reconnect to the wireless network after you hear the alert, move to another location until you see
the signal icon
on the phone screen again.
Shared line in use A shared line is in use remotely. See Using a Shared Line,
page 55.
Incoming call, or
BLF-monitored line is
ringing (BLF Pickup)
A call is ringing on one of your lines or on a BLF-monitored
line.
For BLF Pickup, see Using BLF to Determine a Line State,
page 57.
BLF-monitored line is
idle
See Using BLF to Determine a Line State, page 57.
BLF-monitored line is
in-use
See Using BLF to Determine a Line State, page 57.
BLF-monitored line is
in Do Not Disturb state
See Using BLF to Determine a Line State, page 57.
BLF indicator is
unavailable for this line
See Using BLF to Determine a Line State, page 57.
Idle Intercom line The intercom line is not in use. See Placing or Receiving
Intercom Calls, page 48.
One-way Intercom call The intercom line is sending or receiving one-way audio. See
Placing or Receiving Intercom Calls, page 48.
Two-way Intercom call The recipient pressed the intercom line to activate two-way
audio with the caller. See
Placing or Receiving Intercom
Calls, page 48.
Icon Line or call state Description