Filter
Top Products
4-15
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 4 Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3 in a Load Balancing Configuration
Installation Tasks: Cisco Unified MeetingPlace Web Conferencing Release 5.3 in a Load Balancing Configuration
Step 4 Configure Cisco Unified MeetingPlace Web Conferencing services.
• Complete Step 3 to Step 5 in the “Configuring Services for the First Internal Web Server” section
on page 4-12.
Step 5 Repeat the steps in this procedure until you have installed all of your internal web servers.
Step 6 Proceed to the “Copying GUIDS From the Internal to the External Web Server” section on page 4-15.
Copying GUIDS From the Internal to the External Web Server
The GUIDS entries for site and system must match between internal and external web servers. Make sure
that you run the GUIDS.reg file on each external web server before installing Cisco
Unified MeetingPlace Web Conferencing.
Caution You must complete this step before running the Cisco Unified MeetingPlace Web Conferencing installer
on the external web server. If this step is skipped or completed incorrectly, Presentation mode will not
work for internal users in external meetings, and recovering from this problem requires that you rebuild
the SQL Server database.
Before You Begin
Complete installing and configuring at least one internal Cisco Unified MeetingPlace web server.
Procedure
Step 1 Copy the GUIDS.reg file from the internal web server (located in drive:\Program Files\Cisco
Systems\MPWeb).
Step 2 Place the GUIDS.reg file in the external web server’s drive:\Temp directory.
Step 3 To install the GUIDS.reg file on the external web server, double-click it.
Step 4 When prompted to add the information from the GUIDS.reg file to the registry, click OK.
Step 5 Proceed to the “Installing the First External Web Server” section on page 4-15.
Installing the First External Web Server
Before You Begin
• Read Chapter 2, “Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3” and have
it available to assist you with this procedure.
• Complete the “Preparing the External Cluster” section on page 4-10.
• Complete the “Copying GUIDS From the Internal to the External Web Server” section on page 4-15.
Note The GUIDS entries for site and system must match between internal and external web servers.
Make sure that you run the GUIDS.reg file on each external web server before installing Cisco
Unified MeetingPlace Web Conferencing.