Filter
Top Products
3-5
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 3 Installing Cisco Unified MeetingPlace Web Conferencing for a Segmented Meeting Access Configuration
How to Install Cisco Unified MeetingPlace Web Conferencing Release 5.3 in an SMA-1S Configuration
Note If you force SSL on all users, both internal and external users will be forced to use SSL when they access
the external web server.
How to Install Cisco Unified MeetingPlace Web Conferencing
Release 5.3 in an SMA-1S Configuration
Topics in this section include:
• Gathering Basic Information About Your Web Server, page 3-5
• Installing Cisco Unified MeetingPlace Web Conferencing in an SMA-1S Configuration, page 3-5
Gathering Basic Information About Your Web Server
Gather and record the following information to prepare for your SMA-1S deployment.
Installing Cisco Unified MeetingPlace Web Conferencing in an SMA-1S
Configuration
Restrictions
• You must be installing Cisco Unified MeetingPlace Web Conferencing on a Cisco MCS with Cisco
MCS OS 2000.4.2 (SR 2) or a later release.
• Your system must satisfy all the requirements as described in the Release Notes for your release of
Cisco Unified MeetingPlace Web Conferencing.
• You must be deploying this Cisco MCS in a network segment, such as a DMZ.
Description
Enter the NetBios (computer) name of the web server.
Value
NetBios
Notes
Description
Enter the IP address or hostname of the web server.
Value
IP address
Hostname
Notes
Description
Enter the IP address the web server resolves to internally.
Value
IP address
Notes
Description
Enter the IP address the web server resolves to externally.
Value
IP address
Notes