Filter
Top Products
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Modifying VLAN Settings
4-28
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Step 2 In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
Step 3 To enable VLAN, in the OpFlags field, change bit 5 to 0 (zero).
To disable VLAN, in the OpFlags field, change bit 5 to 1.
For more information about this field, see OpFlags parameter in Table A-5 on
page A-16.
Step 4 Click Apply.
Using the Phone Network Configuration Screen
Procedure
Step 1 Display the Network Configuration menu.
For instructions, see the “Displaying the Network Configuration Menu” section
on page 4-4.
Step 2 Unlock Network Configuration menu options.
For instructions, see the “Unlocking and Locking Options on the Network
Configuration Menu” section on page 4-5.
Step 3 Scroll to VLAN Enabled.
If VLAN is enabled, the option appears as
VLAN Enabled YES
Step 4 Press the No softkey to disable VLAN.
Step 5 Press Save.