Filter
Top Products
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Configuration Methods
4-2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Configuration Methods
Table 4-1 describes the methods that you can use to configure network settings for
a Cisco Unified IP Phone.
This chapter describes how to use the Phone Configuration web page and the
Network Configuration menu to configure most network settings for the
Cisco Unified IP Phone. For more information about using the Phone
Configuration web page for configuration, see Appendix A, “Additional
Configuration Methods and Parameters.” For information about using the IVR
system for configuration, see Appendix A, “Additional Configuration Methods
and Parameters.”
Related Topics
• Accessing Network Settings through a Phone Configuration Web Page,
page 4-2
• Accessing Network Configuration Settings through the Network
Configuration Menu, page 4-4
Accessing Network Settings through a Phone
Configuration Web Page
You can view and set network configuration options for a Cisco Unified IP Phone
7905G and 7912G from the Phone Configuration web page for that phone. To set
options in this web page, you must first use the UIPassword parameter in the
phone profile file to set up a password. If you do not set up a password, you will
not be able to change network settings, and Apply will not be available.
For more information about the UIPassword parameter, see Table A-8 on
page A-23.
Table 4-1 Methods for Configuring Network Settings
Cisco Unified IP Phone Configuration Methods
7905G and 7912G
• Use the Phone Configuration web page
• Use the phone Network Configuration menu