Filter
Top Products
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Verifying Network Settings
4-12
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Related Topics
• Verifying Network Settings, page 4-7
• Modifying DHCP Settings, page 4-13
• Configuring IP Settings, page 4-17
• Modifying VLAN Settings, page 4-26
• Configuring TFTP Options, page 4-29
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous ARP responses.
Disabling the ability to accept Gratuitous ARP
will prevent applications that use this mechanism
to monitor and record voice streams from
working. If voice monitoring is not desired, set
this option to No (disabled).
Use Cisco Unified
CallManager
Administration to modify.
DSCP For Call
Control
DSCP IP classification for call control signalling. Use Cisco Unified
CallManager to modify.
DSCP For
Configuration
DSCP IP classification for any phone
configuration transfer.
Use Cisco Unified
CallManager to modify.
DSCP For Services DSCP IP classification for phone-based services. Use Cisco Unified
CallManager to modify.
Handset Only
Mode
Indicates whether the speaker is enabled (No) or
disabled (Yes).
Use Cisco Unified
CallManager to modify.
Web Access
Enabled
Indicates whether the internal web server is
enabled (Yes) or disabled (No) for the phone.
When disabled, you cannot access web pages for
the phone.
Use Cisco Unified
CallManager to modify.
Table 4-2 Network Settings (continued)
Network Setting Description Usage Notes