Filter
Top Products
47
REMOTE ACCESS
Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
Operating the
answering machine
When you have accessed your
answering machine, you can operate
it using the keypad numbers on the
phone you are using.
Time saver
The Time saver feature is useful if you
are out and want to ring in and check
if you have received any new messages.
If your answering machine is set to
time saver you can check whether you
have new messages or not before your
answering machine actually answers
your call. If you have new messages
your answering machine will answer
after 2 rings, if you do not have any
new messages, it will not answer until
6 rings. This enables you to hang up
before you are connected, saving you
time and the cost of a call.
Note
If you enter your security PIN code
incorrectly, after the second attempt,
your Synergy 700 will announce:
“Thank you for calling” and will
then hang up.
To check for messages
Dial your phone number and
wait.
When you hear your outgoing
message, press the
✱
button
on your phone. You will hear,
“Please enter your security code”.
Enter your security code.
If you have new messages,
you will hear, “You have ‘n’ new
messages”.
Your messages will be played.
If you have no new messages,
you will hear, “You have no new
messages, to hear main menu
press 1”.
You have 15 seconds to enter
any other instructions before
your Synergy 700 hangs up.