Filter
Top Products
Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
SETTING UP
13
4 Connect the telephone line cord
Battery performance
The charge capacity of rechargeable
battery packs will reduce with time as
they wear out, so reducing talk/standby
time of the handset. Eventually they
will need to be replaced. New battery
packs (item code: 003267) can be
obtained from the Helpline on 08706
058 047.
After charging your handset for the
first time, subsequent charging time
for the battery pack is approximately
6-8 hours a day. Battery pack and
case may become warm during
charging, this is normal.
Under ideal conditions, the handset
battery pack should give about 12
hours talktime or 150 hours standby
on a single charge. (This does not
mean you can unplug the base station
or leave it for this length of time
without charge.)
Please note, however, that new NiCad
battery packs do not reach full
capacity until they have been in
normal use for several days.
5 To set the day and time
The message counter on the
base unit will flash between
0 and C until the day and time
are set.
The day and time must be set
using the Synergy 700 handset.
Your Synergy 700 automatically
adds the day and time to all
messages and memos received.
When you first switch the
power on, the clock is set to
Sunday, 12.01pm. You can
change the day and time as
required.
Press the ߜ button twice on
the Synergy 700 handset.
Press the 0 button. The prompt
will announce, “To set day and
time press
✱
, to hear day and
time press
#
”.
(Please note that if you press
the
#
button this allows you
to check the day and time.)
Press the
✱
button. The prompt
will announce, “Please enter
new day and time after the tone”.
M
e
n
u
M
e
n
u
0
Note
The main menu announcements
are automatically announced
through the handset earpiece when
the ߜ button is pressed twice.