Filter
Top Products
33
Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
Audible Message alert
When new messages have been
received, your Synergy 700 will beep
every 10 seconds (when audible
message is switched ON). The volume
of the beep is at the volume you have
set for the loudspeaker. The default
setting is OFF.
To change the answer delay
setting
Press and hold the SKIP
ᮣ
button on the base unit until
the current setting is
announced, then release.
Press and release the SKIP
ᮣ
button to move through the
settings, with each press the
options will be announced
and will also be shown on the
base unit display, i.e 8, 9,
Time Saver, (see page 47) 2, 3,
4, 5, 6, 7.
When you hear the setting
you want, do not press the
SKIP
ᮣ
button again. After a
short delay your chosen
setting will be announced.
To check the answer delay
setting at the base station
Press and release the SKIP
ᮣ
button.
The current setting will be
announced and also shown on
the base unit display.
To switch audible message alert
ON or OFF
When the answering machine
is set to ON and in the idle
mode:
Press and hold the
ᮤ
SKIP
button on the base unit to
change the setting.
The prompt will announce
“Message alert on/off” as
appropriate.
ANSWER MACHINE