Filter
Top Products
45
ANSWER MACHINE
Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
Call screening/Call intercept
You can let your answering machine
pick up a call, even if you are in. This
allows you to identify the caller and
decide whether to take the call.
Make sure the volume is set to an
audible level, see page 32. Allow the
incoming call to be answered by your
Synergy 700 answering machine as
normal. You will hear the caller begin
to leave a message.
To screen a call via the handset
(when the handset is off the base
unit)
When your Synergy 700 starts
to record an incoming
message, the IN USE light will
flash. The display will show
SCREEN?
Press the ߜ button.
You can hear the caller on the
handset.
Or
To interrupt recording and
talk to your caller, press the
TALK button.
Recording is stopped.
M
e
n
u
To record a new memo
Press the ߜ button on the
handset twice.
Press the 7 button. The prompt
will announce, “Please speak
after the tone. To end recording
press square”.
Speak your memo into the
handset.
The display will show r
flashing.
Press the
#
button to end
recording.
Your memo is now stored and
can be played back later.
Memos are stored in the same
way as incoming messages,
and the message counter on
the base unit will increase by 1.
Press and hold the
✘ button to
return the handset to standby.
7
P
Q
R
S
M
e
n
u
S
e
c
r
e
c
y