Filter
Top Products
Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
10
INTRODUCTION
Introduction
Your Synergy 700 has been designed for ease of use and made
to the high standards set by BT.
Please read the instructions carefully before use and retain this user guide for
future reference.
Unpacking your Synergy 700
For your records
If anything is missing, please contact
your place of purchase immediately.
One Synergy 700 base station
One Synergy 700 handset
NiCad battery pack
One power supply for base station
One telephone line cord
(pre-connected)
Date of purchase:
Place of purchase:
Serial number:
For guarantee purposes proof of
purchase is required so please keep
your receipt.
Enter your Base station PIN here:
See page 25 for more information.
General
Only use the power supply included with the product.
Using an unauthorised power supply will invalidate your
guarantee and may damage the telephone. The item
number for the mains power supply is 005391.
Only use the approved rechargeable battery pack supplied.
Spare battery packs – item code 003267 are available
from the BT Synergy Helpline on 08706 058 047.
Do not open the handset or base station. This could
expose you to high voltages or other risks. Contact the
Synergy Helpline 08706 058 047 for all repairs.
Radio signals transmitted between the handset and base
may cause interference to hearing aids.
This product should not be used near emergency/
intensive care medical equipment and should not be used
by people with pacemakers.
Your product may interfere with other electrical
equipment, e.g. TV and radio sets, clock/alarms and
computers if placed too close. It is recommended that you
place your product at least one metre away from such
appliances to minimise any risk of intereference.
Never dispose of the battery pack in a fire. There is a
serious risk of explosion and / or the release of highly
toxic chemicals.
Cleaning
Simply clean the handset and base station with a damp
(not wet) cloth, or an anti-static wipe. Never use
household polish as this will damage the product.
Never use a dry cloth as this may cause a static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the battery pack is being
recharged. This is normal. However, we recommend that
you do not place the product on antique/veneered wood to
avoid damage.
Do not stand your product on carpets or other surfaces
which generate fibres, or place it in locations preventing
the free flow of air over its surfaces.
Do not submerge any part of your product in water and do
not use it in damp conditions, such as bathrooms.
Do not expose your product to fire, explosive or other
hazardous conditions.
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend that you
unplug the power and telephone line cord for the
duration of the storm.
Safety information