Response 75 – Edition 7 – 26th October ’00 – 3370
6
Before inserting the back-up battery
you must ensure that your unit is
connected to the mains power.
The back-up battery (9V alkaline not
supplied) ensures that all settings and
messages are saved for up to six hours
in the event of a power cut.
If the back-up battery runs out, or no
battery is fitted, then in the event of a
power failure your Response 75 will
revert to its original settings and
messages will be lost.
If the battery is low the “Battery Low”
light will come on.
Insert a 9V alkaline battery into the
battery compartment.
You will now be able to use your
telephone as normal.
Your Response 75 is now ready to use.
4 Insert the back-up battery
6 You can now plug your
telephone line cord into
your Response 75
Please note
Your Response 75 Plus battery low light,
located beside the display, indicates
back-up battery strength.
The LED will light up when the battery
is low. It also remains lit when no
back-up battery is inserted.
BATTERY
5 Plug your Response 75
into the telephone socket