To record a memo
Play
memo
Response 75 – Edition 7 – 26th October ’00 – 3370
14
You can use your Response 75
to record a memo which can
be played back by another user.
A memo can be of any length,
up to the maximum recording
time available (36 minutes).
Press and hold the
Play/memo
button.
Your Response 75 will beep and
the display flashes ‘
r
’
.
Keep holding the
Play/memo
button and record your memo
clearly, about 15-30 cms from
the microphone.
To end the recording release
the
Play/memo button.
Your Response 75 stores memos
and treats them in the same way
as incoming messages.
Please note
To play back, delete or skip forward or
backward through memos, follow the
instructions for playing back messages
(see below).
Press the Play/memo button.
Your Response 75 will announce
“You have X messages”.
Messages and memos are
announced and played back in
the order they were received.
During message playback the
message indicator shows the
number of the message being
played.
9 flashes if the
message is number 10 or more.
Press the
Skip
ᮣ
button to
skip forward to the beginning
of the next message.
Press the
ᮤ
Skip button once
to return to the start of the
current message or twice to go
back to the previous message.
Press the
Pause button to
pause playback. The display
will flash P. Press it again to
resume playback.
When all your messages have
been played, your Response 75
announces
“End of messages” and
the message indicator counts
down from 8 to 0.
Play
memo
Skip
ᮣ
Skip
ᮣ
Pause
To playback messages and
memos
Audible message alert
Press and hold
ᮤ
Skip to toggle
between on and off.
You can stop your Response 75 from
beeping to indicate new memos and
messages have been left.
Press and hold
ᮤ
Skip button.
Your Response 75 announces “Message
Alert off”.
To switch message alert on press and
hold the
ᮤ
Skip button again.
Your Response 75 announces “Message
Alert On”.